|
YAMAHA DS7, R5,
RD250/350/400, RZ350, RD250/350LC |
|
K&L (FCC) Clutch Disc
set
FCC clutch plates, FCC
is the leading clutch manufacture in Japan, and OEM supplier for all
four Japanese motorcycle makes. There clutch components are the highest
quality available.
Includes Seven (7) friction discs
$92.95 (17-7375)
Applications
|
NOTE:
We recommend that all friction plates
are immersed in drive case oil for 3-4 hours before
installation. |
|
Clutch Springs
Set of 6 Yamaha OEM springs
$36.42
Clutch Bolts
Replacement Clutch spring bolt with
washer
Yamaha OEM part
Sold as each
Fits 76-79 RD's with 7 disc clutch
$1.99 (PN 90159-06010-00)
|
Fits the above listed clutch
Yamaha OEM parts
Sold as each
RD 250/350/R5/DS6/DS7
$6.50ea
(360-16325-00)
|
RD400 1976-1979
$10.95 ea
.
(498-16325-00)
|
|
|
Clutch Kits and Spring
Kits
|
|
|
CK
Standard Series
Friction plates
-
Cork-based clutch material
impregnated with aluminum particles to increase wear life and heat
resistance
-
Highly compressed
construction avoids swell and clutch drag
-
Ideal for general-purpose
street/sport/touring bikes
-
Kit includes complete engine
set of friction plates only
$71.95
(CK2240)
Applications
|
DRC Series Clutch Kits
Friction plates, Steel plates and Springs
-
Anti-swell, alloy-impregnated
heavy-duty cork-based facings for smooth clutch take-up
-
Allow modulation, unlike paper
clutches which tend to snatch
-
Complete engine set of friction
plates, HD springs and steel separator plates prevent premature driven
plate wear, oil muddying and loss of stack height
-
Built with swagged aluminum
carriers that spread the load on the clutch basket and prevent clutch
basket “dogging”
$113.95 (DRC43)
Applications
|
|
EBC Clutch Spring
Set
Springs weaken after miles of
use and should always be replaced when changing clutch plates. EBC
springs are 10% stiffer than stock springs and are sold in sets. Upgrading
to new springs will provide a slightly firmer feel at the lever.
EBC spring sets are designed to suit each motorcycle application,
having calculated the most suitable spring calibration for each design.
$10.50 (CSK2)
Spring
Applications
|
|
Clutch Hub Lock Tab
|
RD125, 200 and other Small Displacement
motorcycles
Clutch Disc Sets
|
|
Clutch Actuator Kit
MK033 Kit Contents:
CLUTCH WORM x 1
CLUTCH WORM DUST SEAL x 1
CLUTCH WORM LINK WITH PIN x 1
CLUTCH WORM ADJUSTER SCREW x 1
CLUTCH WORM NYLON HOUSING x 1
CLUTCH WORM NYLON HOUSING SCREW x 2
CLUTCH WORM RETURN SPRING x 1
Applications
|
YAMAHA
R5, DS7
all
RD250
1973-1975
RD350
1973-1975
RD400
1976-1979 |
YAMAHA
TZ250
1973-1978
TZ350
1973-1978
TD3, TR3
TY250G
1980 |
$59.95
(MK033) |
Clutch Push Rod
The Clutch push rod wears over time creating a
leak around the seal. The push rod is no longer available from Yamaha.
Replace your worn or bent push rod with A HVC reproduction push rod.
Made to exact factory specs.
Applications
$20.15 (???-16357-0?-00) |
Kawasaki Triple Clutch Plates
The FCC Clutch Plates are
HVCcycle's recommended stock replacement for Kawasaki Triples. FCC is the
leading clutch manufacturer in Japan and OEM supplier for all four Japanese
motorcycle makes. Their clutch components are the highest quality available.
OEM Cross Reference: 13088-015,
13088-1008, 13088-028, 13088-021.
Includes Seven (7) Friction Discs.
Applications:
Kawasaki H1
500 all years
Kawasaki
H2 750 all years
Kawasaki
KH 400/500 all years
$17-7177 (17-7177) |
