Y-BOOT AIR FILTER KIT

Eliminates the stock air box -- Increases flow & mid-range torque -- Delivers increased throttle response -- Choose from two different filter options-- Fits R5's, RD 250's, RD 350's, RD400's, RZ350's, DS7 and Banshee Quads with 26mm or 28mm Carbs.

K&N Y-BOOT Air Filter

Y-Boot
K&N Air filter
Compression ring
Clamps

RD/R5/DS7 1970-1979
$71.95 (HVC20102)

$71.95 (HVC20102-2)

UNI Y-BOOT Air Filter

Y-boot
UNI Air Filter
Compression ring
Clamps
$55.95 (HVC20102-1)

• RD 250/350/400 1973-1979

• Includes one set of reeds

• $40.00 (345-13613)
  

• Fits RD250/350/400 1973-1978

• Includes reed cage, reed valves, & stop plates

• $83.75 each (345-13610-00)

TDR "HYPER TENSION REEDS"

TDR "HYPER TENSION REEDS" are the hottest reed valves on the market today.

TDR "HYPER TENSION REEDS" are made of the highest quality material available. This material is custom designed by TDR to give the best possible performance and have a long working lifespan.

TDR "HYPER TENSION REEDS" will outperform and outlast all reeds on the market today!

Kits include 2 sets of reeds for both cylinders and installation instructions.
 

• RD250LC/ 350LC 1980-1982

  RD 250/350/400 1973-1978

  $75.99 ea (345-13565)

Yamaha Intake Manifold with Cross Over Inlet.

• Install a cross over tube or boost bottle to  increase low end to mid range torque

• Use the stock RD reed cages

• slight modification required to this manifold to fit RD's

• Standard on the RZ and Banshee

• 28mm carbs

• Boost bottle listed below

• $29.99 ea (31k-13565-01)

30-34mm Intake Manifolds

• For use with the larger Carburetors

• Gaskets included

• Red, yellow, or blue also available

• Manifolds without cross over holes also available

• Made from POLYURETHANE,
  No cracking or ripping with these bullet proof manifolds

• Fits the 58mm Carburetor flange on Mikuni TM and VM series .

• Boost bottle listed below

$99.99 (UPP1106)

Yamaha RD 1973-1979

$3.27 ea (87a-13621-00-00)

 

Yamaha RZ / Banshee

 

 

$3.27 ea (3GG-13621-00-00)

 

Mikuni replacement Intake Flange

• For Mikuni spigot mount carbs

• 60mm center to center bolt hole spacing

• Clamp Included

• Fits 1970-1972 Yamaha R5, DS7

$18.95ea (14-1014)

YAMAHA RD350, 250 Carburetor Y-Boot '73-'75

Genuine Yamaha Part
Great to replace that old hard Y-boot
Can also be used to install a K&N filter
Clamps available below
 
$30.99  (360-14453)

Yamaha R5, DS7 Air Cleaner Joint

• No longer available from Yamaha

• HVC reproduction item,

• Guaranteed to fit like an original part

• High quality molded rubber.

• Fits 1970 to 1972 R5 and DS7 models

• Sold as a set of two.

• Clamps available below

$54.99 (278-14455-00)

Yamaha RD 400 Air Cleaner Joint

• No longer available from Yamaha

• HVC reproduction item,

• Guaranteed to fit like an original part

• High quality molded rubber.

• Fits 1976 to 1979 RD 250 and RD400 Models

• Sold as a set of two.

• Clamps Available below

$54.99 (1A0-14453-01-00)

Intake Band Clamp

• Fits the Carb side of the air cleaner joint

• 1 clamp required for each boot

• OEM Style

• Includes the clamp and screw

$2.99ea (90460-49058)

• Fits the intake manifold side of the Carb

• OEM style

• Includes the clamp and screw

• Applications: Yamaha RD250, 350, 400

$2.99 ea (90460-43053)

Intake Joint Spring Band

• Fits the air box side of the air cleaner joint Yamaha R5, DS7

• 1 required for each Joint

• Use on intake boots 278-14455-00

$4.99ea (278-14456-00)

Boost Bottle

• The HVCcycle Boost bottle is designed to help increase throttle response, acceleration and top end power.

• Stores atomized fuel right where it is needed.

• Made from high quality aluminum

• 275cc capacity

• 2 inch oval shape to allow clearance 6.25in length

• Designed with our billet aluminum leak proof nipple to ensure a tight seal.

• Cross over intake manifolds required

• Applications

  • RD250, 350, 400, 1973-1979

  • RD350 LC 1980-1982

  • RZ350 1984-1985

  • Yamaha Banshee all years.

$39.99 (HVC200108)

Cross Over Tube

for use on the cross over intake manifolds

Strait Pipe

$18.75 (29L-14465-00)

$36.99 (48H-14465-00)

Cross Over Tube and Boost Bottle Scissor Clip

OEM type Clamp to mount and secure the cross over tube or the boost bottle onto the  cross over type intake manifolds.

$4.06ea (90467-20085)

Uni Filter street bike air filters are a direct factory replacement filter and are designed to fit perfectly into your stock air box. They provide unsurpassed airflow, dirt stopping and overall performance.

$12.50 (NU-2291)

Yamaha RD/R5 Replacement UNI Filter

• Application

  • '70-'72 Yamaha R5, DS7

  • '73-'75 Yamaha RD250, RD350

$26.95 (NU-2205)

Yamaha RD125 /RD200 Replacement UNI Filter

$16.95ea (NU-2229)

HVC cycle, hvccycle@hvccycle.com. Real bikes don't have cams.