HVCcycle has developed a replacement rear master kit for the RD400 1976-1979

The original rear master cylinder on the RD400 will corrode internally causing deep pits. Even with a new rebuild kit the master cylinder with bypass brake fluid and fail to build up pressure to actuate the brake caliper. Our replacement kit is a bolt on bleed and go. It comes with all the hardware to bolt it  on to the frame.  Includes a banjo bolt micro switch ready to plug into the existing wire harness, and a reservoir hose   The master cylinder is a Magura unit with a 16mm piston that is found on modern day BMW rear brakes.  It works great with the RD400 brake lever push rod. The adapter bracket is made from aircraft quality aluminum and anodized black to match the frame.    Our proto type unit has been in use for 3 months as of AUG 30, 2007 and is working flawlessly. Slight Modification of the bracket is needed for use on the RD400F Daytona. $220.99 (HVC200220)

Each kit contains seals to rebuild one caliper.

Brake caliper rebuild service available

Do you think your caliper is junk? Send it to us, we will give it an overhaul.

Master Cylinder Rebuild kits include seals, spring, and plunger

RD350/ RD400  fwd '73-'78  Picture $74.99   (1A0-W0041-00-00)
RD400F Daytona Front '79-'80  Picture $63.99 (MK232)
RD400/400F Rear 14mm '76-'79  Picture $87.99 (MK233)
RZ350 Rear  K&L Brand $29.00 (32-4021)
RZ350  Fwd K&L Brand $29.00 (32-1480)

Brake master cylinder rebuild service available

HVC Reproduction Caliper Pistons are now available.

• Made from stainless steel so they will never pit and rust around the seals again

• 48mm x 17.15mm

• If you are not satisfied with our pistons we will offer a full refund.

• Highest quality with the best price.

• MADE IN THE USA!!

Found on various Yamaha models from 1971 to 1978

Fits calipers with the following part numbers

• 306-25810-09-00

•  306-258110-0A-00

• 533-25810-12-00

• 533-25810-10-00

• 1A1-25810-51-50

• 1A2-25810-50-00

• 1A2-25810-10-00

$19.99 for one (HVC200106)

$39.00 for a set of two(HVC200106/2)

HVC Reproduction Caliper Piston

• Made from stainless steel so they will never pit and rust around the seals again

• 42.8mmOD  x 33.05mm tall

• If you are not satisfied with our pistons we will offer a full refund.

• Highest quality with the best price.

• MADE IN THE USA!!

• Applications, RD400F, XS750F 1978-1979

$24.75ea (HVC200106F)

• Tour Max Piston

• 38mm OD x 36.3mm Tall

• Replaces Yamaha # 4w1-w0057-00-00

• Fits the following

  • Yamaha RD250/350LC 1980-1982

  • RX50K 1983

  • XJ550 1981-1983

  • XJ750 1981-1983

  • XS1100LH 1981 Front

  • XJ1100J 1982

  • XV920J Front

  $40.95ea (HVC200106-3)

  

we have 4 in stock when sold out we will have them made out of stainless.

Yamaha RD rear drum

Applications:

• DS7/R5 1970-1972
• RD250/350 1973-1975
• RD350LC 1980-1982
• most any Yamaha with a rear drum brake

$6.95  (12-0001)

Yamaha RD400 front disc

Replaces (1A0-83980-30-00)

$26.99 (26H-83980-00-00)

Overhauled Master Cylinder
Includes:
New Piston, Seals, & Spring.
New Cap & Diaphragm.
Powder coated in a black satin finish.

6 month warranty from the date of purchase.
$ 200.00 (HVC20098)

Send in your old master cylinder for a $20.00 core credit.

Yamaha R5/DS7/ RD250 front drum

Mounts on the front brake perch

$26.99(232-83980-30-00)

Use with the brake diaphragm PN HVC20073

$12.95(HVC20073-1)

$10.99 (HVC20097)

$6.99 (90501-10406)

Over time the original reservoir becomes old and brittle and will start to leak.

$17.81 (HVC200100)

• 14mm hex, M10x1.00 or M10x1.25 thread.
• wire terminals included
• (20-01011-52) 10x1.0mm
  (20-01012-52) 10x1.25mm

  $21.95

  Select Thread Pitch

  (20-01011-52)10x1.0mm(20-01012-52) 10x1.25mm

  

$8.75 (HVC20055)

Disc Brake and Carrier Lock Tabs

Brake rotor to carrier lock tabs
All RD disc brakes, XS, TX, and more.
8 required for each disc. HVC reproduction item. (small tab in picture)
$10.99 set of 8 (90215-06106-00)

Disc carrier to hub lock tabs
All RD disc brakes, XS, TX, and more
3 required  (large)
$4.98ea (341-25412-00)

$8.00 (HVC20087)

We have put a economical replacement brake master cylinder kit together.

Brake light switch and 10 x 1.0 banjo bolt included

Great replacement for the RD400.

Application	Price / Part Number	Magic Button
Front Brake Shoes (180 x 30mm) RD250 1974  R5, 1970-1972 DS6/7 1969-1972 (front and rear) RD200, CS3, CS5  1970-1976 YDS, YR1, YR2, R3, 1965-1969 XS400 1978-1981 XS360 1977 XS250 C 1980 TA125 1975	$34.99 (EBC 513)
Front & Rear Brake Pads RD250/ 350 Front 1973-1975 RD400  Front & Rear  1976-1978 XS500B 1975 XS2 / TX500 1972-1974 TX650 A XS650 B, C 1974-1976 TX750 1973-1974	$25.75 (FA-11)
Rear Brake Shoes RD250/350LC Rear 1980-1982 RD250/350 1973-1975 YR1, YR2, R3, 1967-1969 XS650 & Special 1980-1983 XS650 1977-1979 XS2/TX650 1972-1976 TA125 1975 EBC Shoes or equivalent	$36.95 (EBC-514)
Front Brake pads RD350 LC '81-'82	$26.01 (610-228)
Front &Rear Brake Pads RD400F Front/Rear 1979 XS400 Front 1980-1981 XS750 Front Right 1978-1979 XS850 Front Right 1980-1981 XS1100 Front Right 1979-1981 XS1100 LH Rear 1981 XS1100 J Rear 1982 Front Left Available for XS models XS750 Front Left 1978-1979 XS850 Front Left 1980-1981 XS1100 Front Left 1979-1981	$30.95 (FA-41)
	$30.95 (FA-61)
Front Brake Pads RZ350 Front  1984-1985 XV250 1988-1990 XS400 1982-1983 XV500 1983 XZ 550 1982-1983 XJ650 Seca / Seca Turbo 1982-1983 XJ750 Maxim 1982 XT600 1984-1989	$26.01 (FA-81)
Rear Brake Pads RZ350  1984-1985  Too many others to list	$25.00 (FA-88)

SBS Ceramic Brake Pads

Designed for flawless performance on all street bikes NOT factory-equipped with sintered metal pads High Friction brake pads provide the ultimate in stopping power no matter what the conditions. Asbestos-free brakes using patented Unified Composite Technology. All brake pad materials in two unified and balanced pads. This balance ensures no hot spots, glazing, premature fading or excessive rotor wear. The result is powerful, fade-free braking performance-even in extreme conditions. Applications: RD250/350 '73-75 RD400 '76-78 XS 360 B '76-77 XS 650 '75-76 TX 500/650/750 '73-74   $27.95 (1721-0258)

Daido Safe-D High Performance Disc Brake Pads

	Heat Absorbing Metal Base Longer Wear Life Greater Fade Resistance Applications: RD200 (Front) '75 RD200DX '76-77 RS125DX '76 RS125(2A0) '77-79 RS100DX '79 RS100 '77-78 RD50DX '75-77 RD50 '78-79 RD50M '77-78 FS1-DX '77-78 $9.95 (DDY02) WHILE SUPPLIES LAST
	Heat Absorbing Metal Base Longer Wear Life Greater Fade Resistance Applications: RD350LC (Front) '80 RD250LC '80 $9.95 (DY15) WHILE SUPPLIES LAST

We can custom make almost any brake line, for info and pricing please call.

• What's good about stainless steel lines?
  1. Eliminates power loss due to hose expansion
  2. Eliminates spongy brakes
  3. Increased brake feel
  4. Decreases braking distance
  5. Maintenance free
  6. Will not deteriorate over time
  7. You need more?

  

  Click logo