Z1R Eclipse Helmets

Electronic ignitions for Vintage Motorcycles

New Kits in stock

RZ350 / RD125 / RD200 / YR1 / YR2 / YR3.

• Park your bike on the grass, dirt or HOT asphalt.

• For use under the side stand.

• Made from 14 gauge Stainless Steel, will not rust

• Will support any size motorcycle

• FREE with any order over $500.00

Ignition Timing Tester

(buzzbox)

Eliminates the guesswork when timing a points-type ignition. Allows you to concentrate on adjusting the points without having to look at your multi-meter for a reading, just listen for the audible tone to know when your points close. A switch allows for either a light or a tone at the moment of point closure Can also be used as a continuity tester.

$39.00 (LM4100)

• Reproduction dampers, exact copy of the original Yamaha dampers

• Made from high quality fuel and heat resistant rubber

• Dampers are used to secure the battery box.

• Applications

  • Yamaha RD400 1977-1980

• Sold as a set of 2

$12.99 (1A0-21746-01-00)

Also know as wire loom covering.

This is the plastic (PVC) covering that covers the wiring for the controls and the wire harness.  Great for a true 100% restoration.  The original covering gets hard and cracks, discolors or is so dirty it will not clean up. HVCcycle has reproduced the covering in the grey and black.  Sold per foot and cut to length  so you can order just what you need.

Flame Resistant

Black is available in 5 different sizes, Grey is available in 3 different sizes

Grey	Black
3/16"  HVC200132-1  $1.00 per foot	1/4"   HVC200133-1  $1.20 per foot
1/4"  HVC200132-2  $1.40 per foot	3/8"   HVC200133-2  $2.00 per foot
3/8"  HVC200132-3  $2.36 per foot	1/2"  HVC200133-3  $3.00 per foot
	3/4 " HVC200133-4  $3.48 Per Foot
	1"  HVC200133-5  $3.99 Per Foot
Select Size 3/16" HVC200132-1 $1.00 1/4" HVC200132-2 $1.40 3/8" HVC200132-3 $2.36	Select Size 1/4" HVC200133-1 $1.20 3/8" HVC200133-2 $2.00 1/2" HVC200133-3 $3.00 3/4 " HVC200133-4 $3.48 1" HVC200133-5 $3.99

• HVCcycle Reproduction part

• Kawasaki PN 92088-013

• Fits the below bikes and more

  • H2 all

  • KZ900 76-77

  • Z1, Z1A, Z1B 73-75

   

  $5.00ea (92088-013R)

Applications

• RD250/350 drum brake with the hole

• Numerous other Yamahas

Yamaha RD 400 Phillips Screw Engine Side Cover Kit

• Screws

• Includes bolts for both the L/H and R/H Engine Side Covers (4 covers)

• Applications

  • Yamaha RD400 1976-1980

  • Yamaha RD250 European 1976-1980

$24.95 (HVC200135-1)

Yamaha R5, DS7, RD250, RD350 Phillips Screw Engine Side Cover Kit

• Zinc Coated Phillips Head Screws

• Includes bolts for both the L/H and R/H Engine Side Covers (4 covers)

• Applications

  • Yamaha R5 / DS7 1970-1972

  • Yamaha RD250 / RD350 1973-1975

$24.95 (HVC200135)

Click Here

Yamaha RD 400 Allen Head Engine Side Cover Bolt Kit

• Stainless Steel bolts
• Includes bolts for both the L/H and R/H Engine Side Covers (4 covers)
• Applications
  • Yamaha RD400 1976-1980
  • Yamaha RD250 European 1976-1980

$19.95 (HVC200134-1)

Yamaha R5, DS7, RD250, RD350  Allen Head Engine Side Cover Bolt Kit

• Stainless Steel bolts
• Includes bolts for both the L/H and R/H Engine Side Covers (4 covers)
• Applications
  • Yamaha R5 / DS7 1970-1972
  • Yamaha RD250 / RD350 1973-1975

$19.95 (HVC200134)

This grommet fits many kawasaki Bikes in many different locations

Used on the Kawasaki triples for the side cover grommets.

Replaces Kawasaki PN 92071-065 and 92071-056

Sold as a set of 2

Applications

• H2 1972, 1974-1975

• KZ1000E 1979-1980

• KZ550A 1980-1983

• KZ550 (GPZ) 1981

• KZ750E 1980-1982

Yamaha Reproduction Mirrors

• 4" Round chrome reproduction mirrors

• Original mirrors were getting so hard to find we took maters in our own hands and had them reproduced.

• Almost an exact copy of the original, we could not copy the tuning fork emblem, some legal kind of thing.

• Sold as a set of 2, one right hand mirror and one left hand mirror.   The right mirror has Left hand threads

• Replaces Yamaha Part Numbers  341-26290-10-00 (Left) and 341-26290-01-00 (right)

$29.99 (HVC20089)

YAMAHA FORK CLIP AND WASHER KIT

Kit Contains

• FORK OIL SEAL WASHER x 2

• FORK OIL SEAL CLIP x 2

Applications

• Yamaha DS7/ R5 1970-1972

• Yamaha  RD250/ 350 1973-1975

• Yamaha RD400 1976-1978

• Any other early Yamaha with 34mm forks

$11.99 (HVC200130)

YAMAHA HEAD LIGHT / INDICATOR MOUNTING KIT

Kit Contains

• HEADLAMP BOWL SIDE RUBBERS x 2

• HEADLAMP BOWL SIDE INNER SPECIAL INSERTS x 2

• FRONT INDICATOR FIXING NUTS x 2

• FRONT INDICATOR SPRING WASHERS x 2

• FRONT INDICATOR SPECIAL CHROME WASHERS x 2

Applications

• Yamaha  RD250/ 350 1973-1975

• Yamaha RD400 1976-1979

YAMAHA REAR INDICATOR MOUNTING KIT

Kit Contains

• CHROME 'PEAR SHAPED' WASHER x 2

• RUBBER DAMPER FOR CHROME WASHER x2

• CUP WASHER, INNER x 2

• SPRING WASHER, INNER x 2

• PLAIN NUT, INNER x 2

Applications

• Yamaha  RD250/ 350 1973-1975

• Yamaha RD400 1976-1979

$50.00 (MK258)

Kawasaki  Triple Coils, Set of 3

The OEM style replica High Tension Coil Set fits Kawasaki Triples, 3-cylinder 2-stroke street bikes

Replaces OEM Part numbers 21121-047, 21121-057, 21121-059, and 21121-064

Applications:

• Kawasaki H1,D,E,F  1971-1975
• Kawasaki H2, H2B, H2C 1972-1975
• Kawasaki KH500- A8  1976

$115.00 (618-112)

Yamaha DS6 Throttle Cable Complete (grey)

1 into 3, Includes:

Upper cable, 2 lower cables, and the oil injection pump cable.

$89.99 (246-26421-00-00)

CLICK HERE

Vintage Yamaha Service Manuals

CLICK HERE

520 Chain and sprocket kits available for Yamaha RDs

Please Call

Reproduction

• 1967 YR21
• 1968 YR2
• 1968 YR2C
• 1969 DS6C
• 1970 DS6B
• 1970 XS1
• Sold as a set of 2

$40.00 (211-23191-40-00)

Kawasaki Triple Fuel Tank Band Strap

BACK IN STOCK!

HVCcycle Reproduction Item

• Stronger than Stock or other aftermarket bands

• Stainless steel hooks

• Made from Santoprene synthetic rubber.  Santoprene is highly durable, resistant to fatigue, ozone, ultraviolet, acids, alkali, oils and lubricants

• Applications

  • H2, 1973-1975

  • H1 , 1973-1975, KH500 1976

  • S2, 1972-1973

  • S1, all years

• Kawasaki Z1

• Band without hooks

Chromed Steel Fork Caps

• Reproduction Fork Cap Nuts
• Stock Chromed Steel OEM type Caps
• New O-Rings Included (not pictured)
• Sold as a set of 2
• Fits the 34mm Fork Tubes for the following models
• Yamaha
  • 1970-1972 R5
  • 1972-1973 DS7
  • 1970 XS1
  • 1971 XS1B
  • 1972 XS2
  • 1973 TX650

Includes the Transmission Dip Stick and the O-Ring

YAM RZ350 83-85

YAM RD350 YPVS

83-92

$9.99 (HVC200RZ4)

• Reproduction locking fuel cap assembly

• Includes the seal and vent assembly and 2 keys

• Applications

  • 1A0-24602-00-00 (Yamaha Part Number)

    • RD400 1976-1978,

  • 1E7-24602-00-00 (Yamaha Part Number)

    • XS850G/H 1980-1981

    • XS750F 1979

    • TX650A 1974

    • XS650 1976-79 Standard models

    • XS500 1976-1978

    • XS400 1977-1978

    • XS360 1976-1977

    • RD125DX 

   

  $43.50 (HVC200127)
  

• Reproduction locking fuel cap assembly

• Includes the seal and vent assembly and 2 keys

• Applications

  • 2V0-24602-00-00 4R0-24602-01-00 (Yamaha Part Number)

    • RD400F/G 1979-1980,

    • XS400 1978-1982 Specials

    • SR500 1978-1981

    • XS650 1978-84 Specials

    • XS750SF 1979 Special

    • XS850 1980-1981 Specials

    • XS1100 1979-1981 SF,LG,SG,LH,SH

  $43.50 (HVC200127-1)

  

• OEM Battery Strap

• Applications

  • RZ350 1983-1985

  • RD350YPVS 1983- 1996

$9.99 (26H-82131-00-00)

GTO / GTA 350 HEAD GASKET

• Hard to find head gaskets
• Reproduction part, made to Bridgestone specs by HVCcycle
• .039in aluminum thick
• Sold as a set of 2

$16.00 (1141-9000)

• Replica of the stock grab rail.

• Chrome

• H2 1973-1973

$95.00ea (900-601)

Cylinder  Fin Absorbers, Set of 4

• Reduces cylinder vibration and noise
• No longer available from Yamaha, HVC reproduction item.
• sold as a set of 4
• Applications
  • RD400 76'-80'
  • Will fit the Daytona Special
  • other applications possible

$34.99(1A0-11162-02-00)

Cylinder  Fin Absorbers, Set of 4

• Reduces cylinder vibration and noise
• No longer available from Yamaha, HVC reproduction item.
• sold as a set of 4
• Applications
  • R5/DS7 70'-72
  • RD250/350 73'-75'
  • other applications possible

$34.99 (521-11162-01-00)

Alligator Strip

Here is the answer for installing Seat covers

• Use on older metal pans where the the clips are broken off

• Use on plastic molded seat pans

• Use on fiberglass seat pans

• Top choice of 2 major motorcycle seat manufactures

• Designed and manufactured by HVCcycle

Strips are 10 inches in length by 1/2 inch wide. They are designed to be used as one piece or cut down into two or three pieces, just cut between the rivet holes.

Attaches using standard 1/8th or 3mm inch pop rivets

Made from .025inch thick steel.

$5.99ea (HVC-SEAT-ALSTRIP)

Click Here

VM26 &VM28 Lever Choke Kit

As Pictured, Fits Yamaha R5/DS7, RD350, RD400 1970-1979 and other VM26 and VM28 Carburetors.

$22.99 (HVC200128)

• Reproduction Plate, exact copy of the original Yamaha part

• Made from 14 Gauge Steel

• Applications

  • 1973-1975 Yamaha RD250/ RD350 A/B

  • 1976-1980 Yamaha RD400 C/D/E/F/G

  • 1976-1980 Yamaha TZ250/TZ350 C/D/E/F/G

• Reproduction Carburetor boots

• Sold as a set of two

• Made from high quality fuel and heat resistant rubber

• boots mount on carburetor tops  for the RD400F Daytona.

• HVCcycle Reproduction Item

• Applications

  • RZ350 1984-1985

  • RD350 YPVS 1983-1992

  $4.99 (90215-20223-00)