 |
- Stock Pro-X Piston on the intake side
|
| |
|
 |
- Draw a reference line strait across.
|
| |
|
 |
- Use a Dremel cut off wheel and carefully
cut on the top of the reference line
- After it is cut, use a smooth cut flat
file to even the surface.
- chamfer the front edge.
- Use fine sandpaper to finish the
surface.
|
|
If
you do not feel comfortable performing this procedure. Let us know and
for $25.00 we will perform this operation on a set of pistons.
(that is two pistons) |
