 |
 |
 |
 |
|
Oil Injection Fill Cap with Gasket
$17.50 (HVC20079)
Oil Injection Cap Gasket
Gasket only
$3.15(HVC20079-1) |
Oil Injection Tank Fill
Manifold with cap
Cap included (gasket not included)
$17.00 (360-21752-00-00)
Gasket only
$3.15(HVC20079-1) |
Oil
Injection Tank Fill Pipe
Attaches to the oil injection tank and the fill manifold
$15.00 (360-21753-00-00)
|
Tail Light Damper Kit
Includes both rubber dampers for the rear taillight bracket
$8.15 (HVC20080)
|
Handle Bar Wire Tie
-
Get the authentic restoration look you need
-
Replace worn, faded, cracked or missing ties
$3.50 ea (HVC20081) |
Brake Bleed Cap
Replace loose, torn or
missing bleeder caps
$3.25 ea (HVC20082)
|
Battery Vibration Band
Fits around the battery to keep the
battery tight inside the battery box.
(battery not included)
$9.99 (HVC20084)
|
Indicator Mount Damper Kit
-
The cure for loose
speedometers & tachometers
-
Kit includes 2
dampers for the speedo & tach, plus instructions for installation
$12.00 (HVC20086)
|
|
RD Tachometer Drive
Reseal Kit
-
Reseal your leaking tachometer drive housing on the engine
case
-
Kit includes 2 O-rings OEM P/N 93210-13016-00 &
93210-07100-00
-
Application: R5, DS7, RD250, 350, 400 ('70-'79)
$7.50 (HVC20088)
|
Yamaha Reproduction
Mirrors
Click Here
|
Exhaust Gasket
Located
Between the Header Pipe and the main exhaust pipe
OEM # 360-14714-00-00
$25.50ea (HVC20095)
|
Handle Bar Mount Peg
Bushings
$29.99 (HVC20096-1) |
|
Rear Fuel Tank Mount Dampers
HVC Original
Remanufactured to OEM specs
For 1970-1975 Yamaha R5's and RD's
Set of two
$14.50 (HVC20099)
|
Rear Fender Damper Kit
Includes a set of (4)
NOS Rear Fender Rubber Grommets for the rear fender.
$14.50 (HVC200101) |
Oil Injection Pump Re-Seal Kit
Includes:
1. Three internal pump seals, Large and small.
2. Engine side cover seal
3. Pump to side cover mating gasket and body gasket
$32.99
(HVC200103)
|
Speedometer & Tachometer Bezel
Covers
-
Reproduction item
-
OEM pn 360-83513-00
-
Set of two
$30.00 (HVC200105) |
|
Fork Dust
Boots RD, R5 1970-1975 34mm
Click Here
FORK SEALS |
YAMAHA RD350, 250 Carburetor Y-Boot
'73-'75
-
Genuine Yamaha Part
-
Great to replace that old hard
Y-boot
-
Can also be used to install a
K&N filter
-
Intake Band Clamp
-
Fits the carb side of
the intake boot
-
2 clamps required for
the boot
-
OEM Style
-
Includes the clamp and
screw
$2.99ea (90460-49058)
|
Neutral Switch
$19.99 (1L9-82540-00-00)
Neutral Switch O-Ring
$3.50 (93210-29196-00)
|
Oil Tank Level View Glass
$21.99 (360-21761-00) |
|
Steering Stem Nut
Applications:
too many to list
Replaces Yamaha Part Number 90179-25033-00
$7.99 (HVC20092)
|
|
BRAKE
CALIPER PISTONS HVC Reproduction
Caliper Pistons are now available.
Made from stainless steel so
they will never pit and rust around the seals again
48mm x 17.15mm
If you are not satisfied
with our pistons we will offer a full refund.
Highest quality with the
best price.
MADE IN THE USA!!
Found on various Yamaha models from 1971 to
1978
Fits calipers with the following
part numbers:
 |
306-25810-09-00 |
| 306-258110-0A-00 |
| 533-25810-12-00 |
| 533-25810-10-00 |
| 1A1-25810-51-50 |
| 1A2-25810-50-00 |
| 1A2-25810-10-00 |
$19.99 for one (HVC200106)
$39.00 for a set of
two(HVC200106/2) |
Rear Wheel Drive Dampers 73-75 RD
-
Reproduction damper
-
OEM pn 168-25346-00
-
Set of four
$49.99 (030559-1) |
Rear Foot Peg Rubber Cover
-
Reproduction Cover
-
OEM pn 168-27433-10
-
Sold as each.
$13.99 (168-27433-10) |
Oil Drain Plug / Shifter Tension
Bolt Can be used for
either a replacement Drain Plug or the Shifter Tension Bolt.
$4.99 (90109-14385) |
Oil Drain Plug Gasket
$4.50ea
(4F4-14766-00)
|
|
|
|
|
|
