• Use this kit when you remove the oil injection pump to run Pre-mix.

• Block off plate is made from 0.080 inch aluminum that has been laser cut to the exact size of the oil pump mating surface.

• Includes the Plate and a gasket.

$9.99 (HVC200111)

$13.99 (90507-25023)

• Genuine Yamaha Part

• Comes as pictures with mounting gasket (not shown)

• Two outlet (only one shown)

• Three position, ON / OFF / RESERVE

Click Here

• Replace your old or missing neutral wire isolator

• Located under the L/H engine side cover

• Applications

  • Fits all Yamaha 2 stroke twins 1970-1979,

  • Yamaha RZ 84-85

$3.50 (HVC200116)

Installs into the frame to secure the Right and left side covers

one kit required per side cover

$10.99 (HVC20049)

Yamaha Crankcase Breather

$5.99 (583-15371-00-00)

$ 21.99 (HVC20068)

Attached to the center stand to prevent center stand from hitting exhaust pipes

$4.99  (HVC20074)

• Reproduction damper

• Set of four

$39.99 (030559-1)

$19.99 (1L9-82540-00-00)

$3.50 (93210-29196-00)

Carburetor Repair kit

Applications

1980-1982 RD350LC

will work on the RD250LC except for the jets.

$42.99ea (MK240)

CLICK HERE

Reflectors

Amber or Red

Threaded stud mouted reflectors

$13.99 ea  (HVC20053 Amber, HVC20053-1 Red)

The Clutch push rod wears over time creating a leak around the seal. The push rod is no longer available from Yamaha.  Replace your worn or bent push rod with A HVC reproduction push rod.  Made to exact factory specs.

$16.99 (328-16357-00-00)

Application

RD250/350(237-16357-01-00)R5/DS7 (237-16357-01-00)RD400/250 76-79(328-16357-00-00)